Center for Quantum Devices - Most Downloaded Journal Articles

Page 23 of 31: Prev << 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 >> Next (771 Items)

13.	Advances in APDs for UV astronomy Melville P. Ulmer; Ryan M. McClintock; Jose L. Pau; Manijeh Razeghi Proc. SPIE 6686, UV, X-Ray, and Gamma-Ray Space Instrumentation for Astronomy XV, 668605 (September 13, 2007)-- November 13, 2007 ...[Visit Journal] We report the most recent work of our group of the development of avalanche photo diodes based on (Al)GaN. The goal of this group is to achieve single photon counting. In this paper we first give the scientific motivation for making such a device in the context of UV astronomy and then describe current work and plans for future development. The development includes improving the sensitivity to be able to carry out single photon detection and the fabrication of arrays. [reprint (PDF)]
13.	Inductively coupled plasma etching and processing techniques for type-II InAs/GaSb superlattices infrared detectors toward high fill factor focal plane arrays E.K. Huang, B.M. Nguyen, D. Hoffman, P.Y. Delaunay and M. Razeghi SPIE Proceedings, San Jose, CA Volume 7222-0Z-- January 26, 2009 ...[Visit Journal] A challenge for Type-II InAs/GaSb superlattice (T2SL) photodetectors is to achieve high fill factor, high aspect ratio etching for third generation focal plane arrays (FPAs). Initially, we compare the morphological and electrical results of single element T2SL photodiodes after BCl₃/Ar inductively coupled plasma (ICP) and electron cyclotron resonance (ECR) dry etching. Using a Si₃N₄ hard mask, ICP-etched structures exemplify greater sidewall verticality and smoothness, which are essential toward the realization of high fill factor FPAs. ICP-etched single element devices with SiO₂ passivation that are 9.3 µm in cutoff wavelength achieved vertical sidewalls of 7.7 µm in depth with a resistance area product at zero bias of greater than 1,000 Ω·cm² and maximum differential resistance in excess of 10,000 Ω·cm² at 77 K. By only modifying the etching technique in the fabrication steps, the ICP-etched photodiodes showed an order of magnitude decrease in their dark current densities in comparison to the ECR-etched devices. Finally, high aspect ratio etching is demonstrated on mutli-element arrays with 3 µm-wide trenches that are 11 µm deep. [reprint (PDF)]
13.	Room-temperature continuous-wave operation of quantum-cascade lasers at λ ~ 4 µm J.S. Yu, S.R. Darvish, A. Evans, J. Nguyen, S. Slivken, and M. Razeghi Applied Physics Letters 88 (4)-- January 23, 2006 ...[Visit Journal] High-power cw λ~4 μm quantum-cascade lasers (QCLs) are demonstrated. The effect of different cavity length and laser die bonding is also investigated. For a high-reflectivity-coated 11-μm-wide and 4-mm-long epilayer-down bonded QCL, cw output powers as high as 1.6 W at 80 K and 160 mW at 298 K are obtained, and the cw operation is achieved up to 313 K with 12 mW. [reprint (PDF)]
13.	Use of Sacrificial Zinc Oxide Template Layers for Epitaxial Lift-Off of Yttria-Stabilised Zirconia Thin Films D. J. Rogers, T. Maroutian, V. E. Sandana, P. Lecoeur, F. H. Teherani, P. Bove and M. Razeghi Proc. of SPIE 11687, 116872C (2021) ...[Visit Journal] 275 nm-thick Yttria-stabilised zirconia (YSZ) layers were grown on 240 nm-thick epitaxial (0002)-oriented ZnO buffer layers on c-sapphire substrates by pulsed laser deposition (PLD). X-ray diffraction (XRD) studies revealed high quality epitaxial growth with the YSZ having a preferential (111) orientation and a root mean square surface roughness of 1.4 nm over an area of 10 um x 10 um. The YSZ top surface was then temporary bonded to an Apiezon W wax carrier and the sample was immersed in 0.1M HCl so as to preferentially etch/dissolve away the ZnO underlayer and release of the YSZ from the sapphire substrate. XRD revealed only the characteristic (111) peak of YSZ after lift-off and thus confirmed both the dissolution of the ZnO and the preservation of the crystallographic integrity of the YSZ on the wax carrier. Optical and Atomic Force Microscopy revealed some buckling, roughening and cracking of the lifted YSZ, however, which was probably due to tensile epitaxial strain release. [reprint (PDF)]
13.	High differential resistance type-II InAs/GaSb superlattice photodiodes for the long-wavelength infrared A. Hood, D. Hoffman, B.M. Nguyen, P.Y. Delaunay, E. Michel and M. Razeghi Applied Physics Letters, 89 (9)-- August 28, 2006 ...[Visit Journal] Type-II InAs/GaSb superlattice photodiodes with a 50% cutoff wavelength ranging from 11 to 13 μm are presented. Optimization of diffusion limited photodiodes provided superlattice structures for improved injection efficiency in direct injection hybrid focal plane array applications. [reprint (PDF)]
13.	New frontiers in InP based quantum devices Manijeh Razeghi Indium Phosphide and Related Materials, 2008. IPRM 2008. 20th International Conference on, pp.1,4, (2008)-- May 29, 2008 ...[Visit Journal] Recent research activities taking place at center for quantum devices (CQD) based on InP material system, especially the exploration and demonstration of the state-of-art high performance quantum cascade lasers (QCL), greatly facilitate the understanding of the underlining physical principles governing the device operation. Thanks to the endless effort putting into the semiconductor epitaxy technologies, including the Molecular Beam Epitaxy (MBE) and low pressure metal organic chemical vapor deposition (LP-MOCVD), the world has seen a close approaching to the ultimate band gap engineering. Highly sophisticated man-made heterostructure, which incorporates hundreds of alternating layers of GaInAs/AlInAs with each layer thickness and composition specifically designed, can be created within a single growth. The material quality is evidenced by the atomically abrupt interfaces. The versatility of the band gap engineering is greatly enhanced by the strain-balanced technique, which allows for growing structures with continuously tunable conduction band offset with little defects. As a result, the room temperature continuous wave (CW) wall plug efficiency (WPE) and the maximum achievable output optical power from a single device have been constantly improving. Novel waveguide incorporating the photonic crystal distributed feedback (PCDFB) mechanism is also investigated with satisfactory preliminary results. [reprint (PDF)]
13.	Growth of In_1-xTl_xSb, a New Infrared Material, by Low-Pressure Metalorganic Chemical Vapor Deposition Y.H. Choi, R. Sudharsanan, C, Besikci, and M. Razeghi Applied Physics Letters 63 (3)-- July 19, 1993 ...[Visit Journal] We report the growth of In_1-xTl_xSb, a new III-V alloy for long-wavelength infrared detector applications, by low-pressure metalorganic chemical vapor deposition. In_1-xTl_xSb with good surface morphology was obtained on both GaAs and InSb substrates at a growth temperature of 455 °C. X-ray diffraction measurements showed resolved peaks of In_1-xTl_xSb and InSb films. Infrared absorption spectrum of In_1-xTl_xSb showed a shift toward lower energies compared to InSb spectrum. Hall mobility data on In_1-xTl_xSb/InSb/GaAs structure showed enhanced mobility at low temperatures compared to InSb/GaAs structure. [reprint (PDF)]
13.	Breakthroughs Bring THz Spectroscopy, Sensing Closer to Mainstream Manijeh Razeghi, Quanyong Lu, Santanu Manna, Donghai Wu & Steven Slivken Photonics Spectra, December Issue, pp. 48-- December 1, 2016 ...[Visit Journal] The terahertz (THz) electromagnetic spectrum (1 to 10 THz), sitting between the infrared wavelengths on the higher frequency side and microwaves on the lower frequency side, lies unique and important properties. THz waves can pass through a number of materials, including synthetics, textiles, paper and cardboard. Many biomolecules, proteins, explosives or narcotics feature characteristic absorption I ines - so-called spectral "fingerprints" - at frequencies between 1 and 10 THz. [reprint (PDF)]
13.	Room-temperature continuous wave operation of distributed feedback quantum cascade lasers with watt-level power output Q.Y. Lu, Y. Bai, N. Bandyopadhyay, Sl Slivken, and M. Razeghi Applied Physics Letters, Vol. 97, No. 23, p. 231119-1-- December 6, 2010 ...[Visit Journal] We demonstrate surface-grating distributed feedback quantum cascade lasers (QCLs) with a watt-level power output at 4.75 μm. A device with a 5 mm cavity length exhibits an output power of 1.1 W in room-temperature cw operation. Single-mode operation with a side mode suppression ratio of 30 dB is obtained in the working temperature of 15–105 °C. A double-lobed far field with negligible beam steering is observed. The significance of this demonstration lies in its simplicity and readiness to be applied to standard QCL wafers with the promise of high-power performances. [reprint (PDF)]
13.	Deep ultraviolet (254 nm) focal plane array E. Cicek, Z. Vashaei, R. McClintock, and M. Razeghi SPIE Proceedings, Conference on Infrared Sensors, Devices and Applications; and Single Photon Imaging II, Vol. 8155, p. 81551O-1-- August 21, 2011 ...[Visit Journal] We report the synthesis, fabrication and testing of a 320 × 256 focal plane array (FPA) of back-illuminated, solarblind, p-i-n, Al_xGa_1-xN-based detectors, fully realized within our research laboratory. We implemented a novel pulsed atomic layer deposition technique for the metalorganic chemical vapor deposition (MOCVD) growth of crackfree, thick, and high Al composition Al_xGa_1-xN layers. Following the growth, the wafer was processed into a 320 × 256 array of 25 μm × 25 μm pixels on a 30 μm pixel-pitch and surrounding mini-arrays. A diagnostic mini-array was hybridized to a silicon fan-out chip to allow the study of electrical and optical characteristics of discrete pixels of the FPA. At a reverse bias of 1 V, an average photodetector exhibited a low dark current density of 1.12×10^-8 A·cm^-2. Solar-blind operation is observed throughout the array with peak detection occurring at wavelengths of 256 nm and lower and falling off three orders of magnitude by 285 nm. After indium bump deposition and dicing, the FPA is hybridized to a matching ISC 9809 readout integrated circuit (ROIC). By developing a novel masking technology, we significantly reduced the visible response of the ROIC and thus the need for external filtering to achieve solar- and visible-blind operation is eliminated. This allowed the FPA to achieve high external quantum efficiency (EQE): at 254 nm, average pixels showed unbiased peak responsivity of 75 mA/W, which corresponds to an EQE of ~37%. Finally, the uniformity of the FPA and imaging properties are investigated. [reprint (PDF)]
13.	Study on the effects of minority carrier leakage in InAsSb/InPAsSb double heterostructure B. Lane, D. Wu, H.J. Yi, J. Diaz, A. Rybaltowski, S. Kim, M. Erdtmann, H. Jeon and M. Razeghi Applied Physics Letters 70 (11)-- April 17, 1997 ...[Visit Journal] InAs_xSb_1−x/InP_1−x−yAs_xSb_y double heterostructures have been grown on InAs substrates by metal-organic chemical vapor deposition. The minority carrier leakage to the cladding layers was studied with photoluminescence measurements on the InAsSb/InPAsSb double heterostructures. A carrier leakage model is used to extract parameters related to the leakage current (diffusion-coefficient and length) from experimental results. Using the obtained parameters, the temperature dependence of the threshold current density of InAsSb/InPAsSb double heterostructure lasers is predicted and compared with experimental results. [reprint (PDF)]
13.	High operating temperature 320 x 256 middle-wavelength infrared focal plane array imaging based on an InAs/InGaAs/InAlAs/InP quantum dot infrared photodetector S. Tsao, H. Lim, W. Zhang, and M. Razeghi Virtual Journal of Nanoscale Science and Technology-- May 28, 2007 ...[Visit Journal][reprint (PDF)]
13.	Room temperature single-mode terahertz sources based on intracavity difference-frequency generation in quantum cascade lasers Q.Y. Lu, N. Bandyopadhyay, S. Slivken, Y. Bai and M. Razeghi Applied Physics Letters, Vol. 99, Issue 13, p. 131106-1-- September 26, 2011 ...[Visit Journal] We demonstrate room temperature single-mode THz emission at 4 THz based on intracavity difference-frequency generation from mid-infrared dual-wavelength quantum cascade lasers. An integrated dual-period distributed feedback grating is defined on the cap layer to purify both mid-infrared pumping wavelengths and in turn the THz spectra. Single mode operation of the pumping wavelengths results in a single-mode THz operation with a narrow linewidth of 6.6 GHz. A maximum THz power of 8.5 μW with a power conversion efficiency of 10 μW/W² is obtained at room temperature. [reprint (PDF)]
13.	Quantum Dot Intersubband Photodetectors C. Jelen, M. Erdtmann, S. Kim, and M. Razeghi SPIE Conference, San Jose, CA, -- January 22, 2001 ...[Visit Journal] Quantum dots are recognized as very promising candidates for the fabrication of intersubband photodetectors in the infrared spectral range. At present, material quality is making rapid progress and some devices have been demonstrated. Examples of mid-infrared quantum dot intersubband photodetectors are presented along with device design and data analysis. Nonetheless, the performance of these devices remains less than comparable quantum well intersubband photodetectors due to difficulties in controlling the quantum dot size and distribution during epitaxy. [reprint (PDF)]
13.	Novel Sb-based Alloys for Uncooled Infrared Photodetector Applications M. Razeghi SPIE Conference, San Jose, CA, -- January 22, 2001 ...[Visit Journal] We report on the growth and characterization of InSbBi, InTlSb, InTlP, and the quaternary alloys for uncooled long- wavelength infrared photodetector applications. The layers were grown on InSb and GaAs substrates by low-pressure metalorganic chemical vapor deposition. The incorporation of Bi and Tl in InSb was investigated with high-resolution x-ray diffraction, energy dispersive x-ray analysis, and optical photoresponse measurements. We also demonstrate the photodetectors fabricated from the grown InSbBi and InTlSb alloys. InSb_0.96Bi_0.04 photoconductive detectors exhibited a responsivity of 3.2 V/W at 77 K. The estimated Johnson noise limited detectivityat 7 micrometers was 1.7 X 10⁸ cm·Hz^½/W at 77 K. A room temperature operating InSb_0.95Bi_0.05 photodetector was also demonstrated.Photoresponse up to 12 micrometers was achieved at 300 K. The responsivity and Johnson noise-limited detectivity at 10.6 μm were 1.9 mV/W and 1.2 X 10⁶ cm·Hz^½/W, respectively. Photoresponse up to 15 μm was achieved at 300 K from quaternary InTlAsSb and InBiAsSb alloys. [reprint (PDF)]
13.	Growth of Al_xGa_1-xN:Ge on sapphire and silicon substrates X. Zhang, P. Kung, A. Saxler, D. Walker, T.C. Wang, and M. Razeghi Applied Physics Letters 67 (12)-- September 18, 1995 ...[Visit Journal] Al_xGa_1–xN were grown on (00.1) sapphire and (111) silicon substrates in the whole composition range (0 <= x <= 1). The high optical quality of the epilayers was assessed by room-temperature optical absorption and photoluminescence measurements. Layers with higher Al composition are more resistive. Resistive Al_xGa_1–xN epilayers were successfully doped with Ge and free-electron concentration as high as 3 × 10¹⁹ cm^–3 was achieved. [reprint (PDF)]
13.	Energy harvesting from millimetric ZnO single wire piezo-generators Rogers, D. J.; Carroll, C.; Bove, P.; Sandana, V. E.; Goubert, L.; Largeteau, A.; Teherani, F. Hosseini; Demazeau, G.; McClintock, R.; Drouhin, H.-J.; Razeghi, M. Oxide-based Materials and Devices III. Edited by Teherani, Ferechteh H.; Look, David C.; Rogers, David J. Proceedings of the SPIE, Volume 8263, article id. 82631X, 7 pp. (2012).-- February 9, 2013 ...[Visit Journal] This work reports on investigations into the possibility of harvesting energy from the piezoelectric response of millimetric ZnO rods to movement. SEM & PL studies of hydrothermally grown ZnO rods revealed sizes ranging from 1 - 3 mm x 100 - 400 microns and suggested that each was a wurtzite monocrystal. Studies of current & voltage responses as a function of time during bending with a probe arm gave responses coherent with those reported elsewhere in the literature for ZnO nanowires or micro-rod single wire generators. The larger scale of these rods provided some advantages over such nano- and microstructures in terms of contacting ease, signal level & robustness. [reprint (PDF)]
13.	p-Type thin film field effect transistors based on lithium-doped nickel oxide channels grown by pulsed laser deposition V. E. Sandana; D. J. Rogers; F. H. Teherani; P. Bove; R. McClintock; M. Razeghi SPIE Proceedings Volume 10919, Oxide-based Materials and Devices X; 109191H -- March 12, 2019 ...[Visit Journal] Staggered back-gated Field Effect Transistor (FET) structures were made by growing Li-doped NiO on Si₃N₄/SiO₂/Si (111) using room temperature pulsed laser deposition. Optical studies showed over 80% transmission for the NiO:Li channel at wavelengths > 500nm. The MISFET revealed rectifying transfer characteristics, with a V_ON close to zero, a channel mobility of ~ 1 cm²/V·s, a gate leakage current (at +5V) of 0.8 mA and an ION/IOFF ratio (at a Vgs of −15V) of ~ 10³. The transistors showed enhancement-mode output characteristics indicative of a p-type channel with sharp pinchoff, hard saturation, a comparatively high (milliampere range) Id and a relatively low on-resistance of ~11 kΩ. Hence the adoption of Li doping in NiO channels would appear to be a promising approach to obtain p-type TFTs with superior transparency, speed and energy efficiency. [reprint (PDF)]
13.	Theoretical investigation of minority carrier leakage of high-power 0.8 μm InGaAsP/InGaP/GaAs laser diodes J. Diaz, I. Eliashevich, H.J. Yi, M. Stanton, and M. Razeghi Applied Physics Letters 65 (18)-- October 31, 1994 ...[Visit Journal] We report a theoretical model that accurately describes the effects of minority carrier leakage from the InGaAsP waveguide into InGaP cladding layers in high‐power aluminum-free 0.8 μm InGaAsP/InGaP/GaAs separate confinement heterostructure lasers. Current leakage due to the relatively low band‐gap discontinuity between the active region and the InGaP barrier can be eliminated by employing laser diodes with cavity length longer than 500 μm. Experimental results for lasers grown by low-pressure metalorganic chemical vapor deposition are in excellent agreement with the theoretical model. [reprint (PDF)]
13.	Room temperature quantum cascade laser with ∼ 31% wall-plug efficiency F. Wang, S. Slivken, D. H. Wu, and M. Razeghi AIP Advances 10, 075012-- July 14, 2020 ...[Visit Journal] In this article, we report the demonstration of a quantum cascade laser emitting at λ ≈ 4.9 μm with a wall-plug efficiency of ∼31% and an output power of ∼23 W in pulsed operation at room temperature with 50 cascade stages (Ns). With proper fabrication and packaging, this buried ridge quantum cascade laser with a cavity length of 5 mm delivers more than ∼15 W output power, and its wall-plug efficiency exceeds ∼20% at 100 °C. The experimental results of the lasers are well in agreement with the numerical predictions. [reprint (PDF)]
13.	cw operation of 1.57‐μm GaxIn1−xAsyP1−yInP distributed feedback lasers grown by low‐pressure metalorganic chemical vapor deposition M. Razeghi; R. Blondeau; K. Kazmierski; M. Krakowski; B. de Cremoux; J. P. Duchemin; J. C. Bouley Appl. Phys. Lett. 45, 784–786 (1984)-- October 1, 1984 ...[Visit Journal] Continuous wave operation of 1. 57-Jim distributed feedback lasers fabricated on material grown by two-step low-pressure metalorganic chemical vapor deposition growth process is reported for the first time. Room-temperature continuous wave threshold currents as low as 60 rnA have been measured for devices with cavity length of 300 Jim and stripe width of 5 Jim. Single longitudinal mode operation at fixed mode was obtained under the continuous wave condition, in the temperature range 9-90 °C, with the wavelength shift of 0.9 A/C. A stop band of25 A in which no resonance mode emission existed, was observed in the output spectrum of the distributed feedback laser. [reprint (PDF)]
13.	Demonstration of mid-infrared type-II InAs/GaSb superlattice photodiodes grown on GaAs substrate B.M. Nguyen, D. Hoffman, E.K. Huang, S. Bogdanov, P.Y. Delaunay, M. Razeghi and M.Z. Tidrow Applied Physics Letters, Vol. 94, No. 22-- June 8, 2009 ...[Visit Journal] We report the growth and characterization of type-II InAs/GaSb superlattice photodiodes grown on a GaAs substrate. Through a low nucleation temperature and a reduced growth rate, a smooth GaSb surface was obtained on the GaAs substrate with clear atomic steps and low roughness morphology. On the top of the GaSb buffer, a p⁺-i-n⁺ type-II InAs/GaSb superlattice photodiode was grown with a designed cutoff wavelength of 4 μm. The detector exhibited a differential resistance at zero bias (R₀A)in excess of 1600 Ω·cm² and a quantum efficiency of 36.4% at 77 K, providing a specific detectivity of 6 X 10¹¹ cm·Hz^½/W and a background limited operating temperature of 100 K with a 300 K background. Uncooled detectors showed similar performance to those grown on GaSb substrates with a carrier lifetime of 110 ns and a detectivity of 6 X 10⁸ cm·Hz^½/W. [reprint (PDF)]
13.	Band edge tunability of M-structure for heterojunction design in Sb based Type-II superlattice photodiodes B.M. Nguyen, D. Hoffman, P.Y. Delaunay, E.K. Huang, M. Razeghi, and J. Pellegrino Applied Physics Letters, Vol. 93, No. 16, p. 163502-1-- October 20, 2008 ...[Visit Journal] We present theoretically and experimentally the effect of the band discontinuity in Type-II misaligned InAs/GaSb superlattice heterodiodes. Calculations using the empirical tight binding method have shown the great flexibility in tuning the energy levels of the band edge in M-structure superlattice as compared to the standard InAs/GaSb superlattice. Through the experimental realization of several p-pi-M-n photodiodes, the band discontinuity alignment between the standard binary-binary superlattice and the M-structured superlattice was investigated via optical characterization. The agreement between the theoretical predictions and the experimental measurement confirms the capability of controlling the M-structure band edges and suggests a way to exploit this advantage for the realization of heterostructures containing an M-structured superlattice without bias dependent operation. [reprint (PDF)]
12.	High Performance Quantum Cascade Lasers at λ ~ 6 μm M. Razeghi, S. Slivken, J. Yu, A. Evans, and J. David Microelectronics Journal, 34 (5-8)-- May 1, 2003 ...[Visit Journal] This talk will focus on the recent efforts at the Center for Quantum Devices to deliver a high average power quantum cascade laser source at λ ~6 μm. Strain-balancing is used to reduce leakage for these shorter wavelength quantum cascade lasers. Further, the effect of reducing the doping in the injector is explored relative to the threshold current density and maximum average output power. Lastly, to demonstrate more of the potential of these devices, epilayer down bonding is explored as a technique to significantly enhance device performance. [reprint (PDF)]
12.	Demonstration of high performance long wavelength infrared Type-II InAs/GaSb superlattice photodidoe grown on GaAs substrate S. Abdollahi Pour, B.M. Nguyen, S. Bogdanov, E.K. Huang, and M. Razeghi Applied Physics Letters, Vol. 95, No. 17, p. 173505-- October 26, 2009 ...[Visit Journal] We report the growth and characterization of long wavelength infrared type-II InAs/GaSb superlattice photodiodes with a 50% cut-off wavelength at 11 µm, on GaAs substrate. Despite a 7.3% lattice mismatch to the substrate, photodiodes passivated with polyimide exhibit an R₀A value of 35 Ω·cm² at 77 K, which is in the same order of magnitude as reference devices grown on native GaSb substrate. With a reverse applied bias less than 500 mV, the dark current density and differential resistance-area product are close to that of devices on GaSb substrate, within the tolerance of the processing and measurement. The quantum efficiency attains the expected value of 20% at zero bias, resulting in a Johnson limited detectivity of 1.1×10¹¹ Jones. Although some difference in performances is observed, devices grown on GaAs substrate already attained the background limit performance at 77 K with a 300 K background and a 2-π field of view. [reprint (PDF)]

Page 23 of 31: Prev << 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 >> Next (771 Items)